NAME
SYNOPSIS
DESCRIPTION
OPTIONS
ENVIRONMENT
FILES
NOTES
BUGS
SEE ALSO
TRIVIA
AUTHORS

This document was created by man2htm.
Optimized by bashconsole.com.
Time: 01:51:19 GMT, September 06, 2010

NAME

tex, virtex, initex - text formatting and typesetting

SYNOPSIS

tex [options] [& format ] [ file | \ commands ]

DESCRIPTION

Run the TeX typesetter on file, usually creating file.dvi. If the file argument has no extension, ".tex" will be appended to it. Instead of a filename, a set of TeX commands can be given, the first of which must start with a backslash. With a &format argument TeX uses a different set of precompiled commands, contained in format.fmt; it is usually better to use the -fmt format option instead.

TeX formats the interspersed text and commands contained in the named files and outputs a typesetter independent file (called DVI, which is short for DeVice Independent). TeX's capabilities and language are described in The TeX for nroffbook. TeX is normally used with a large body of precompiled macros, and there are several specific formatting systems, such as LaTeX, which require the support of several macro files.

This version of TeX looks at its command line to see what name it was called under. If they exist, then both initex and virtex are symbolic links to the tex executable. When called as initex (or when the -ini option is given) it can be used to precompile macros into a .fmt file. When called as virtex it will use the plain format. When called under any other name, TeX will use that name as the name of the format to use. For example, when called as tex the tex format is used, which is identical to the plain format. The commands defined by the plain format are documented in The TeX for nroffbook. Other formats that are often available include latex and amstex.

The non-option command line arguments to the TeX program are passed to it as the first input line. (But it is often easier to type extended arguments as the first input line, since UNIX shells tend to gobble up or misinterpret TeX's favorite symbols, like backslashes, unless you quote them.) As described in The TeX for nroffbook, that first line should begin with a filename, a \controlsequence, or a &formatname.

The normal usage is to say

tex paper

to start processing paper.tex. The name paper will be the ``jobname'', and is used in forming output filenames. If TeX doesn't get a filename in the first line, the jobname is texput. When looking for a file, TeX looks for the name with and without the default extension (.tex) appended, unless the name already contains that extension. If paper is the ``jobname'', a log of error messages, with rather more detail than normally appears on the screen, will appear in paper.log, and the output file will be in paper.dvi.

This version of TeX can look in the first line of the file paper.tex to see if it begins with the magic sequence %&. If the first line begins with %&format -translate-file tcxname then TeX will use the named format and transation table tcxname to process the source file. Either the format name or the -translate-file specification may be omitted, but not both. This overrides the format selection based on the name by which the program is invoked. The -parse-first-line option or the parse_first_line configuration variable controls whether this behaviour is enabled.

The e response to TeX's error prompt causes the system default editor to start up at the current line of the current file. The environment variable TEXEDIT can be used to change the editor used. It may contain a string with "%s" indicating where the filename goes and "%d" indicating where the decimal line number (if any) goes. For example, a TEXEDIT string for emacs can be set with the sh command

TEXEDIT="emacs +%d %s"; export TEXEDIT

A convenient file in the library is null.tex, containing nothing. When TeX can't find a file it thinks you want to input, it keeps asking you for another filename; responding `null' gets you out of the loop if you don't want to input anything. You can also type your EOF character (usually control-D).

OPTIONS

This version of TeX understands the following command line options.

-enc: Enable the encTeX extensions. This option is only effective in combination with -ini. For documentation of the encTeX extensions see http://www.olsak.net/enctex.html.
-file-line-error: Print error messages in the form file:line:error which is similar to the way many compilers format them.
-no-file-line-error: Disable printing error messages in the file:line:error style.
-file-line-error-style: This is the old name of the -file-line-error option.
-fmt format: Use format as the name of the format to be used, instead of the name by which TeX was called or a %& line.
-halt-on-error: Exit with an error code when an error is encountered during processing.
-help: Print help message and exit.
-ini: Start in INI mode, which is used to dump formats. The INI mode can be used for typesetting, but no format is preloaded, and basic initializations like setting catcodes may be required.
-interaction mode: Sets the interaction mode. The mode can be either batchmode, nonstopmode, scrollmode, and errorstopmode. The meaning of these modes is the same as that of the corresponding \commands.
-ipc: Send DVI output to a socket as well as the usual output file. Whether this option is available is the choice of the installer.
-ipc-start: As -ipc, and starts the server at the other end as well. Whether this option is available is the choice of the installer.
-jobname name: Use name for the job name, instead of deriving it from the name of the input file.
-kpathsea-debug bitmask: Sets path searching debugging flags according to the bitmask. See the Kpathsea manual for details.
-mktex fmt: Enable mktexfmt, where fmt must be either tex or tfm.
-mltex: Enable MLTeX extensions. Only effective in combination with -ini.
-no-mktex fmt: Disable mktexfmt, where fmt must be either tex or tfm.
-output-comment string: Use string for the DVI file comment instead of the date.
-output-directory directory: directory instead of the current directory. Look up input files in directory first, the along the normal search path.
-parse-first-line: If the first line of the main input file begins with %& parse it to look for a dump name or a -translate-file option.
-no-parse-first-line: Disable parsing of the first line of the main input file.
-progname name: Pretend to be program name. This affects both the format used and the search paths.
-recorder: Enable the filename recorder. This leaves a trace of the files opened for input and output in a file with extension .fls.
-shell-escape: Enable the \write18{command} construct. The command can be any shell command. This construct is normally disallowed for security reasons.
-no-shell-escape: Disable the \write18{command} construct, even if it is enabled in the texmf.cnf file.
-src-specials: Insert source specials into the DVI file.
-src-specials where: Insert source specials in certain places of the DVI file. where is a comma-separated value list: cr, display, hbox, math, par, parent, or vbox.
-translate-file tcxname: Use the tcxname translation table to set the mapping of input characters and re-mapping of output characters.
-default-translate-file tcxname: Like -translate-file except that a %& line can overrule this setting.
-version: Print version information and exit.

ENVIRONMENT

See the Kpathsearch library documentation (the `Path specifications' node) for precise details of how the environment variables are used. The kpsewhich utility can be used to query the values of the variables.

One caveat: In most TeX formats, you cannot use ~ in a filename you give directly to TeX, because ~ is an active character, and hence is expanded, not taken as part of the filename. Other programs, such as Metafont, do not have this problem.

TEXMFOUTPUT: Normally, TeX puts its output files in the current directory. If any output file cannot be opened there, it tries to open it in the directory specified in the environment variable TEXMFOUTPUT. There is no default value for that variable. For example, if you say tex paper and the current directory is not writable, if TEXMFOUTPUT has the value /tmp, TeX attempts to create /tmp/paper.log (and /tmp/paper.dvi, if any output is produced.)
TEXINPUTS: Search path for \input and \openin files. This should probably start with ``.'', so that user files are found before system files. An empty path component will be replaced with the paths defined in the texmf.cnf file. For example, set TEXINPUTS to ".:/home/usr/tex:" to prepend the current direcory and ``/home/user/tex'' to the standard search path.
TEXFORMATS: Search path for format files.
TEXPOOL: search path for tex internal strings.
TEXEDIT: Command template for switching to editor. The default, usually vi, is set when TeX is compiled.
TFMFONTS: Search path for font metric (.tfm) files.

FILES

The location of the files mentioned below varies from system to system. Use the kpsewhich utility to find their locations.

texmf.cnf: Configuration file. This contains definitions of search paths as well as other configuration parameters like parse_first_line.
tex.pool: Text file containing TeX's internal strings.
texfonts.map: Filename mapping definitions.
*.tfm: Metric files for TeX's fonts.
*.fmt: Predigested TeX format (.fmt) files.
$TEXMFMAIN/tex/plain/base/plain.tex: The basic macro package described in the TeX for nroffbook.

NOTES

This manual page is not meant to be exhaustive. The complete documentation for this version of TeX can be found in the info manual Web2C: A TeX implementation.

BUGS

This version of TeX implements a number of optional extensions. In fact, many of these extensions conflict to a greater or lesser extent with the definition of TeX. When such extensions are enabled, the banner printed when TeX starts is changed to print TeXk instead of TeX.

This version of TeX fails to trap arithmetic overflow when dimensions are added or subtracted. Cases where this occurs are rare, but when it does the generated DVI file will be invalid.

TRIVIA

TeX, pronounced properly, rhymes with ``blecchhh.'' The proper spelling in typewriter-like fonts is ``TeX'' and not ``TEX'' or ``tex.''

AUTHORS

TeX was designed by Donald E. Knuth, who implemented it using his Web system for Pascal programs. It was ported to Unix at Stanford by Howard Trickey, and at Cornell by Pavel Curtis. The version now offered with the Unix TeX distribution is that generated by the Web to C system (web2c), originally written by Tomas Rokicki and Tim Morgan.

The encTeX extensions were written by Petr Olsak.